Overview

Zinsser Perma-White is a tintable water-based mould resistant interior paint ideal for use on walls, ceilings, cabinets and trim in areas of high humidity and moisture. It’s formulated to resist peeling, cracking, and blistering for up to 7 years without any maintenance. Its self-priming formula allows the paint to stick to the surface without sanding. This product is ideal for both commercial and residential uses due to being washable, scrubbable, stain, and moisture resistant. For areas that are subject to challenging wear and tear we would recommend using the satin and semi-gloss finishes.

Protects from fungal degradation
Self-priming – sticks to surface without sanding
Moisture resistant
Tintable to RAL, NCS, Brand Colours and British Standard 4800, 381C and 5252F

Tinted Colour Information

Tinted paint is custom mixed in house at Next Day Paint using our Zinsser tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.

Area	Interior
Recommended Use	Interior walls, wall cavities, ceilings, trim, doors, and related paintable surfaces. Ideal for bathrooms, basements, kitchens, laundry rooms, closets, locker rooms, hot tub rooms, enclosed porches and pool areas or any interior where mould and mildew is a concern
Base	Water-Based
Coverage	Up to 10m² per litre
Drying Time	30 Minutes
Re-Coat Time	2 Hours
Recommended Coats	2 Coats
Application Method	Brush, Roller or Sprayer

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, grease, oil, wax, mould or possible contaminants that may interfere with adhesion.

Remove all existing mould and mildew before painting, with a product such as
Scrape sand or brush any loose or flaking paint (always take special care when sanding or scraping the old surface, ensure to wear a suitable face covering to avoid inhalation.)
Rust, tannin, grease, mould and mildew and other stains should be blocked with the appropriate stain killing primer-sealer such as
When priming over stained areas, first attempt to remove as much of the stain as possible by washing, sanding, scraping, etc.

Application

Always test a small area to ensure you are happy with the finished results

Shake or stir well before use
Apply with a synthetic brush, roller or sprayer
Only apply in temperatures between 10-32°C
If using a sprayer use only water to thin the paint and no more than 10%
Once first coat has been applied leave to dry for 2 hour before applying a second coat
Paint will be fully cured in 7-10 days

Note: Strong colours may require extra coats or a primer to achieve full strength and opacity we recommend using tinted to match the top coat. Always follow the manufacturer instructions found on the tin.